If you rent to households with Housing Choice Vouchers, or you are thinking about it, you will run into HUD fair market rents. They shape how much a housing authority will pay toward a unit, and they get quoted constantly in landlord forums, often wrongly, as if they were a rent cap or a measure of what your unit is worth.
This guide, part of our market insights hub, explains what fair market rents (FMRs) are, how HUD calculates them, when the FY2027 numbers took effect, how housing authorities turn FMRs into payment standards, how to look up yours, and how FMR differs from market rent and from rent reasonableness.
Note: This article is general education, not legal, financial or investment advice. Voucher program rules are set by HUD regulations and each housing authority's administrative plan, and local rules can differ. Confirm figures with HUD USER and your local housing authority, and consult a local attorney about your situation.
What fair market rents are
A fair market rent is HUD's estimate of the 40th percentile gross rent for standard quality rental units in a given area, published every fiscal year by bedroom count. In plain terms, about 40 percent of recent movers into decent, standard units in the area paid that amount or less, including utilities.
"Gross rent" matters. FMRs measure rent plus utilities, not the contract rent on your lease alone. If renters pay their own heat and electricity, the comparable figure for your unit is the rent you charge plus a utility allowance.
HUD USER, HUD's research site, says FMRs are used to determine payment standard amounts for the Housing Choice Voucher program. They also set initial rents for certain Section 8 contracts, rent ceilings in HOME and Emergency Solutions Grants programs, limits in Continuum of Care awards and flat rents in public housing. HUD also publishes 50th percentile rents for every FMR area.
FMR areas are usually metropolitan areas or non-metropolitan counties. That is a large territory, which is why HUD also publishes ZIP-level figures for some regions, covered below.
How HUD calculates FMRs
According to HUD's FY2027 notice, FMRs estimate the 40th percentile gross rent paid by recent movers into standard quality units. The steps, simplified:
- Base rents. HUD starts from American Community Survey data, using the 2020 to 2024 five-year estimates for FY2027.
- Inflation to the data year. HUD applies a gross rent inflation factor to bring those rents forward.
- Trend to the fiscal year. HUD applies a trend factor to project rents to FY2027. New for FY2027, the notice says HUD uses a weighted average composite of four household fuel and utility components in these factors.
- Limit on decreases. The FY2027 notice says FMRs may be no less than 90 percent of the prior year's FMR for the same bedroom count.
The key point for a landlord is the lag. FMRs are built from survey data covering several past years and then projected forward. In a market where rents jumped or fell recently, the FMR can trail what you see on listings today.
Small Area FMRs
Small Area FMRs (SAFMRs) are calculated for ZIP Code Tabulation Areas instead of whole metro areas, using rent data the Census Bureau provides to HUD. They give higher figures in higher-rent ZIP codes and lower figures in lower-rent ones, so payment standards can track neighborhood rents more closely than a single metro-wide number.
HUD requires housing authorities in certain designated metro areas to use SAFMRs, and its 2023 notice added 41 metro areas to that list. Housing authorities elsewhere can opt in voluntarily. The FY2027 notice caps each two-bedroom SAFMR at no more than 150 percent of the area's two-bedroom FMR. If your property is in a SAFMR area, the ZIP-level number is the one that matters, not the metro figure.
FY2027 FMR release timing
HUD's FY2027 FMR notice was scheduled for publication in the Federal Register on September 1, 2026, and the FY2027 FMRs took effect October 1, 2026, the start of the federal fiscal year. FMRs generally take effect at the start of each federal fiscal year, so expect new figures every fall.
There are a few wrinkles worth knowing as of November 2026:
- Reevaluations. Housing authorities and others could request a reevaluation of an area's FMR during the 30-day comment period. Areas with a valid request keep their FY2026 FMRs while HUD reviews them, and HUD USER posts a list of those areas.
- Revised FMRs. The notice says supporting data for reevaluations is due by January 8, 2027, and HUD plans to post revised FMRs in April 2027.
- Payment standard updates lag. A new FMR does not change your tenant's assistance overnight. Housing authorities update payment standards on their own schedule, within the limits HUD sets, and the timing of when a change reaches a given family depends on program rules. Ask your PHA.
How housing authorities set payment standards from FMR
A payment standard is the figure a public housing authority (PHA) uses to calculate a voucher family's housing assistance payment. Under 24 CFR 982.503, a PHA may set its payment standard anywhere from 90 percent up to 110 percent of the published FMR for each unit size without HUD approval. This is called the basic range.
PHAs can go higher in some cases. An exception payment standard is one above 110 percent of FMR. Under the regulation, a PHA may set one between 110 and 120 percent after notifying HUD if it meets certain criteria, such as a low voucher success rate or high rent burdens among families, and may go up to 120 percent for an individual family as a reasonable accommodation for a person with a disability. Other exception payment standards above 110 percent need HUD approval backed by rental market data.
How the payment standard turns into a subsidy
Under 24 CFR 982.505, the monthly housing assistance payment is the lower of two amounts:
- The payment standard minus the family's total tenant payment, or
- The unit's gross rent minus the family's total tenant payment.
The total tenant payment is set by the PHA from the family's income under HUD rules. So the payment standard works as a ceiling on the subsidy, not on the rent. A unit can rent above the payment standard, but the family pays the difference, and 24 CFR 982.508 limits that: at initial occupancy, if gross rent exceeds the payment standard, the family's share cannot exceed 40 percent of its adjusted monthly income.
Worked example (illustrative)
Suppose the two-bedroom FMR in your area is $1,500 and the PHA sets its payment standard at 100 percent, or $1,500. Your unit rents for $1,450 and the renter pays their own electric, with a utility allowance of $150, so gross rent is $1,600. If the family's total tenant payment is $500:
- Payment standard minus tenant payment: $1,500 minus $500 equals $1,000.
- Gross rent minus tenant payment: $1,600 minus $500 equals $1,100.
- The housing assistance payment is the lower figure, $1,000, paid to you by the PHA.
You receive $1,000 from the PHA and $450 from the renter, who also pays about $150 in utilities, for a total family share of $600. The PHA then checks that $600 does not exceed 40 percent of the family's adjusted monthly income at move-in. If it does, the lease cannot be approved at that rent. These numbers are illustrative only; your PHA's figures and calculation will differ.
How to look up your FMR and payment standard
Finding the right number takes two lookups: HUD's FMR, then your housing authority's payment standard.
- Go to HUD USER's Fair Market Rents page and choose the FY2027 data. The FMR documentation system lets you pick a state and then a county or metro area, and shows the FMR by bedroom count along with a summary of how it was calculated.
- Check whether your area uses Small Area FMRs. If it does, use the FY2027 Small Area FMR schedule to find the figure for your ZIP code.
- Note the bedroom count HUD will use. FMRs are published by bedroom size, and the voucher size and the unit size can differ, so ask your PHA which payment standard applies.
- Get the payment standard from your PHA. Many housing authorities publish a payment standard schedule and a utility allowance schedule. Those two documents, not the FMR, drive the actual math.
- Confirm the effective date. Ask when the PHA's current payment standards took effect and whether an update is planned for FY2027.
Developers can also pull FMR data through HUD USER's API, which requires an account and an access token.
FMR vs market rent vs rent reasonableness
Three different numbers get mixed up in voucher conversations. They answer different questions.
| Figure | Who sets it | What it measures | How it affects you |
|---|---|---|---|
| Fair market rent | HUD | 40th percentile gross rent for standard units across an area, trended forward | Sets the range for the PHA's payment standards |
| Payment standard | Your PHA | 90 to 110 percent of FMR in most cases | Caps the subsidy the PHA pays |
| Rent reasonableness | Your PHA, unit by unit | What comparable unassisted units rent for | Caps the rent the PHA will approve for your unit |
| Market rent | The market | What your specific unit would rent for today | Your pricing benchmark for all renters |
Rent reasonableness
Under 24 CFR 982.507, a PHA may not approve a lease until it determines that the initial rent to owner is reasonable, and the rent may not exceed the most recent reasonable rent determination during the tenancy. The PHA compares your unit to comparable unassisted units considering location, quality, size, unit type and age, along with amenities, housing services, maintenance and utilities you provide under the lease.
The regulation also says that by accepting each monthly housing assistance payment, the owner certifies that the rent is not more than the rent charged for comparable unassisted units in the premises. In other words, do not charge a voucher holder more than you would charge anyone else for the same unit. Under 24 CFR 982.509, rent to owner may also be limited by state or local rent control.
Market rent
Market rent is your own estimate of what the unit commands right now, based on current listings, recent leases and demand. It is the number you should use for pricing, and it may sit above or below the FMR. Our guides to rental property market analysis and rental pricing strategies walk through how to set it.
What FMRs mean for your pricing decisions
FMRs are a useful reference, but they are not a pricing tool for your whole portfolio.
- FMR is not a rent cap for private renters. Nothing in the FMR system limits what you charge a renter without a voucher. Separate state or local rent rules may apply, and our rental market outlook for 2027 covers broader conditions.
- Above-FMR units can still work. A unit priced above the payment standard may still be approved if the rent is reasonable and the family share passes the 40 percent test, especially where the PHA uses exception or Small Area payment standards.
- Below-FMR units are not automatically approved. Rent reasonableness still applies, and the unit must pass inspection. Our guide to NSPIRE inspections for voucher landlords covers that standard.
- Know your local rules on vouchers. Many states and cities ban source-of-income discrimination, which can mean you cannot refuse voucher holders. See our guide to source-of-income discrimination laws.
A simple habit: when new FMRs come out each fall, compare your units' gross rents to the FMR and to your PHA's payment standards. It tells you which units are voucher-friendly at current rents and where a reasonable rent increase might still pass review.
Frequently asked questions
What is the HUD fair market rent?
A fair market rent (FMR) is HUD's estimate of the 40th percentile gross rent for standard quality rental units in an area, published each year by unit size. HUD uses it mainly to set the limits housing authorities use for Housing Choice Voucher payment standards.
When do the FY2027 fair market rents take effect?
HUD's FY2027 FMR notice was scheduled for Federal Register publication on September 1, 2026, and the FMRs take effect October 1, 2026. Areas that filed a valid reevaluation request may keep their FY2026 FMRs until HUD decides.
Can I charge more than fair market rent to a Section 8 tenant?
The FMR itself is not a cap on your rent. What limits a voucher rent is the housing authority's rent reasonableness determination, its payment standard and the rule that a family's share cannot exceed 40 percent of adjusted monthly income at initial occupancy when gross rent is above the payment standard.
Is fair market rent the same as market rent?
No. FMR is an area-wide 40th percentile estimate built from survey data and trended forward, while market rent is what your specific unit would rent for today. A renovated unit in a strong neighborhood can rent well above the FMR, and a dated unit can fall below it.
How do I find the fair market rent for my ZIP code?
Start at HUD USER's Fair Market Rents page, choose the FY2027 data, and look up your county or metro area, or the Small Area FMR schedule if your area uses ZIP-level FMRs. Then ask your housing authority for its current payment standards, which are what actually apply to a voucher.
What to do next
Renting to voucher holders adds a second payer and a second set of records: the housing authority's portion, the renter's portion, inspection paperwork, rent reasonableness correspondence and annual changes in payment standards. Mixing those up is how landlords end up chasing shortfalls they cannot explain.
Shuk's Rent Collection lets the renter pay their portion online by ACH or card with automatic reminders, and a payment from the housing authority that arrives outside Shuk can be recorded as an offline payment so the renter's balance stays accurate. Shuk does not currently track Section 8 housing assistance payments separately from the renter's portion, so keep the PHA's payment statements alongside your records. Reports such as Rent Roll, Payment History and Outstanding Balance export to Excel and PDF, the Document Center and Property Documents hold HAP contracts, inspection notices and PHA letters by property, and the Inspection Tool documents a walkthrough with photos, videos and notes before the PHA inspection.
At as low as $2 per unit per month, with no setup fees and no contract, and with White Glove Onboarding included at no additional cost, Shuk makes organized voucher rent records feasible for landlords and property managers up to 300 units.
Book a demo at shukrentals.com/book-a-demo to see how Rent Collection, Shuk's reports and the Document Center work together so you always know who paid what and have the paperwork the housing authority asks for.






